Sheds are regularly constructed as a means of outdoor storage, which is in itself a popular hobby for many DIY enthusiasts out there, but if the task seems to hard call experts like Capital Construction Contracting Inc to help you. However, it’s not as straightforward as equipping yourself with a few pieces of wood and assembling.
Like any structure, sheds should be safe, secure and efficient enough to stand for many years in the future, so getting the job done properly is essential. Here are the three essential shed-building tips you must follow to guarantee a high quality DIY job that you can be proud of.
Here, South Yorkshire based gate furniture specialist www.qualityironmongery.co.uk use some of their 20 years’ experience to advise on how you can achieve the perfect outdoor shed in just 5 simple steps.
Identify a Good Foundation
If you construct a shed on a weak foundation it isn’t likely to last that long. The vast majority of shed structures can be supported by on-grade foundations that consist of concrete and wood timbers set up on the ground, on any surface. In order to safely support the floor frame of the shed, the concrete blocks and timber need to be levelled and closely spaced. It is important not to use hollow wall blocks for your foundation as these aren’t as sturdy or as reliable as concrete blocks.
The one place a shed shouldn’t be constructed is on low ground, as this surface is often wet as rainfall accumulates and runs downhill. If your chosen shed site is regularly affected by running rainwater you need to ensure there blocks of both timber and concrete are set into around 4 inches of gravel. This will ensure your foundation is protected from the gradual erosion caused by rainwater.
If you are hoping to construct a shed that is more than 150-200 square ft., you will almost certainly need a permanent foundation installed. These foundations are usually constructed using poured-concrete piers or wooden posts buried into holes before they are filled with concrete.
In order to get the essential ground contact with buried wood posts or on0fgrade timbers, make sure they are cut from lumber that has been pressure-treated. Wood that was meant for use above ground will ultimately rot over time and prove not to be an effective foundation.
Low Maintenance Materials
Materials that are high quality, reliable and sturdy enough to last without too much maintenance are what you need to look for when acquiring the parts of your shed. While they be a little pricier than some of the other shed bits and pieces you can get from DIY stores (not to mention useful wood thrown away at dumps), they will certainly save you plenty of time and effort and allow you to concentrate on other DIY jobs away from your shed in future.
Plastic lumber is one of many substitutes you can use for wooden options that can potentially rot, warp, split and decay. Plastic is of course impervious to all these symptoms and what’s more, you’ll never need to paint it. Some other low maintenance materials for you to consider include shingles, composite decking, fibreglass, steel doors and aluminium or vinyl windows.
If your outbuilding is likely to take a beating in the future from severe weather conditions, or if you are aware that weather conditions have proven to be a problem in your area in the past, it might be a good idea to avoid certain materials such as vinyl and aluminium which can take a beating from harsh wind and rain.
An excessive amount of moisture can affect wood in the most catastrophic of ways. You will almost certainly witness a rapidly deteriorating shed over the coming months after installation if you build your shed anywhere near a damp or excessively watery location. Frames, warped floors and doors can all rot as a result of water, so keep your shed well away from the stuff. You might now be thinking what to do should you come across corroded hinges or even mildew. Here’s how to prevent it.
Make sure the lowest wooden component of the frame (in most cases the mudsill) is around 5 to 6 inches above ground to allow for added air circulation in the shed. Leave a good few feet of space between the shed and any walls or shrubbery to ensure every side gets enough circulation and the sunlight needed to dry wood after rainfall. Having this additional surrounding space makes it easy to get repair work done as well as any paint jobs you have in mind.